Sunday 13 October 2013

Project Club: Small Christmas Wreath

This card is a smaller version of the Dimension Stamps main project club card!



 How to Make: 

  • Stamp the wreath twice onto medium green card in Memento Rich Cocoa colour in with two shades of green and red.
  • Cut out one wreath as it is but cut more away from the other wreath.
  • Shape the wreaths and add glitter glue to the stamp tinsel parts.
  • When dry glue together with 3D glue.
  • Cut 6.5cm x 9.5cm piece of cream hammer finish card round off the corners and edge in gold.
  • Cut a 3cm strip from the front right side edge of a 10.5cm x 14.8cm cream hammer finish card.
  • Edge the inside edges of the card that can be seen in gold,.
  • Cut a 2.5cm x 14.8cm strip of dark red card with one of the long edges being a fancy cut edge attach to the front card so the straight edge is over the cut edge of the card.
  • Stamp “Happy Christmas” in gold in the top left hand corner of the card.
  • Attach the cream piece of card on an angle across the card using 3Dfoam pads. 
  • Attach a piece of dark red ribbon across the back of the wreath centrally attach to the cream piece of card using 3Dglue.
  • Finally add a dark red bow to the wreath.

No comments:

Post a Comment